{"id":237,"date":"2020-10-04T15:48:34","date_gmt":"2020-10-04T22:48:34","guid":{"rendered":"http:\/\/iotlab.sdsu.edu\/?page_id=237"},"modified":"2020-10-04T16:12:32","modified_gmt":"2020-10-04T23:12:32","slug":"lpkf-protomat-s63","status":"publish","type":"page","link":"https:\/\/iotlab.sdsu.edu\/index.php\/sample-page\/lpkf-protomat-s63\/","title":{"rendered":"LPKF ProtoMat S63"},"content":{"rendered":"\n<p><strong>Checking collet operations<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Go to the extras menu and select options. Change the user level from advanced user to service. The password is <em>cpro<\/em>. If cpro is not the password, you will need to update your CircuitPro software to the latest version. Close this window.<\/li><li>Go to the machining menu and select <em>service<\/em>, then press the <em>machine setup<\/em> dialogue button. There at the top, you will see the big red stop field. Just underneath this, you will see the button for open\/close clamp. It may say change clamp state.<\/li><li>Open and close the collet while noting the time it takes for the collet to cycle. Do this many times. It should be around 5-6 seconds. We are looking to see if this is shorter than 4 seconds while opening or closing.<\/li><li>Use caution when in the Protomat Machine Setup window. Changes within this section can cause problems.<\/li><\/ul>\n\n\n\n<p><strong>Performing collet maintenance<\/strong><\/p>\n\n\n\n<p>Clean and lube the spindle. If necessary, remove the tool into the toolbox:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"449\" height=\"55\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image012.jpg\" alt=\"\" class=\"wp-image-239\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image012.jpg 449w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image012-300x37.jpg 300w\" sizes=\"auto, (max-width: 449px) 100vw, 449px\" \/><figcaption>Press the tool magazine icon.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"474\" height=\"337\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image013.jpg\" alt=\"\" class=\"wp-image-241\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image013.jpg 474w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image013-300x213.jpg 300w\" sizes=\"auto, (max-width: 474px) 100vw, 474px\" \/><figcaption>Press the target button on the tool that is in the collet.<\/figcaption><\/figure>\n\n\n\n<p>Note: The machine will now return the tool to the toolbox and return to the pause position.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"305\" height=\"229\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image014.jpg\" alt=\"\" class=\"wp-image-242\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image014.jpg 305w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image014-300x225.jpg 300w\" sizes=\"auto, (max-width: 305px) 100vw, 305px\" \/><figcaption>Remove the foot from the bottom of the depth limiter.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"314\" height=\"236\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image015.jpg\" alt=\"\" class=\"wp-image-243\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image015.jpg 314w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image015-300x225.jpg 300w\" sizes=\"auto, (max-width: 314px) 100vw, 314px\" \/><figcaption>With the collet insertion\/removal tool, remove the collet from the spindle.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"314\" height=\"236\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image016.jpg\" alt=\"\" class=\"wp-image-244\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image016.jpg 314w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image016-300x225.jpg 300w\" sizes=\"auto, (max-width: 314px) 100vw, 314px\" \/><figcaption>With the foam brush in the Jagr kit, clean the inside of the collet receptacle.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"344\" height=\"258\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image017.jpg\" alt=\"\" class=\"wp-image-246\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image017.jpg 344w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image017-300x225.jpg 300w\" sizes=\"auto, (max-width: 344px) 100vw, 344px\" \/><figcaption>With the pipe cleaner in the Jagr kit, clean the inside of the collet.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"346\" height=\"260\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image018.jpg\" alt=\"\" class=\"wp-image-248\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image018.jpg 346w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image018-300x225.jpg 300w\" sizes=\"auto, (max-width: 346px) 100vw, 346px\" \/><figcaption>Make sure no debris is inside the gaps in the collet fingers.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"344\" height=\"258\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image019.jpg\" alt=\"\" class=\"wp-image-247\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image019.jpg 344w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image019-300x225.jpg 300w\" sizes=\"auto, (max-width: 344px) 100vw, 344px\" \/><figcaption>With the foam brush in the Jagr kit, apply the Jagr lube on the outside of the collet fingers.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"342\" height=\"257\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image020.jpg\" alt=\"\" class=\"wp-image-250\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image020.jpg 342w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image020-300x225.jpg 300w\" sizes=\"auto, (max-width: 342px) 100vw, 342px\" \/><figcaption>Apply the Jagr lube on the outside of the collet fingers.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"364\" height=\"273\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image021.jpg\" alt=\"\" class=\"wp-image-251\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image021.jpg 364w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image021-300x225.jpg 300w\" sizes=\"auto, (max-width: 364px) 100vw, 364px\" \/><figcaption>With the collet insertion\/removal tool, insert and tighten the collet into place.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"379\" height=\"284\" src=\"http:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image022.jpg\" alt=\"\" class=\"wp-image-252\" srcset=\"https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image022.jpg 379w, https:\/\/iotlab.sdsu.edu\/wp-content\/uploads\/2020\/10\/image022-300x225.jpg 300w\" sizes=\"auto, (max-width: 379px) 100vw, 379px\" \/><figcaption>Insert the foot onto the depth limiter.<\/figcaption><\/figure>\n\n\n\n<p>Acknowledgement: <\/p>\nInformation and images provided by<\/br>\nTom Grassel<\/br>\nLPKF Technical Support<\/br>\nLPKF Laser &#038; Electronics &#8211; North America<\/br>\n12555 SW Leveton Drive, Tualatin, OR 97062\n\n\n\n<p><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Checking collet operations Go to the extras menu and select options. Change the user level from advanced user to service.<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":2,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-237","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/pages\/237","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/comments?post=237"}],"version-history":[{"count":4,"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/pages\/237\/revisions"}],"predecessor-version":[{"id":253,"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/pages\/237\/revisions\/253"}],"up":[{"embeddable":true,"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/pages\/2"}],"wp:attachment":[{"href":"https:\/\/iotlab.sdsu.edu\/index.php\/wp-json\/wp\/v2\/media?parent=237"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}